CHASSIS
Additional Frame Features
1.5 x 3" fully welded tube
Frame
Operator Tower with 7ga. Construction
Rear Bumper
N/A
ROPS
N/A
Front Axle / Yolks
Frame-mounted foot pedal front-end lift assist
OPERATION
Rear Tires
20" x 10" - 8" (Turf Master)
Park Brake / Braking
Hand-operated lever
Operator Controls
Single-lever cruise control (0-7 MPH)
Front Tires
11" x 4" - 5" smooth (run flat)
PTO Clutch
Warner Clutch - 125 ft lb.
Cruise Control
N/A
Lap Bar / Steering Wheel Control
Hand-lever steering control with ball bearing linkage for smooth feel
Additional Controls
Single-knob straight line tracking ajustment
MOWER DECK
Side Construction
1 / 4" steel
Top Reinforcement(s)
7ga. top plate
Deck Height Adjustment
4-pin manual with deck-mounted lift handles / 7 positions
Spindle Construction
5" sealed cast aluminum housing (maintenance-free)
Discharge Chute
High-density, impact-resistant rubber
Deck Size/Type
48" Fabricated Deck
Trim-Side Wear Guard
" trim-side (polymer)
Deck Blades
3 high-lift Marbain blades / 18,500 fpm (approx.)
Cutting Height
1.5" - 4.5"
Bottom Reinforcement
7ga. (.175") steel
Leading Edge Reinforcement
7 ga.
Deck Style/Construction
Fixed floating, fabricated 10ga. (.135) steel shell
GENERAL
Hour Meter
Standard electronic
WARRANTY
Warranty
2 year / no-hour-limit commercial warranty
DIMENSIONS
Width (Chute Up / Down)
50"/61"
Height (ROPS Down / Up)
46"
Weight
665 lbs
Length
77"
ENGINE & DRIVE SYSTEM
Horsepower / CC's
15hp 603cc
Engine Type
Kawasaki FS541v (Electric Start)
Fuel Capacity
5 gal.
Ground Speed
7mph fwd. / 3mph rev.
Transmission
Hydro-Gear ZT 2800 charged (commercial-grade)
- 48-inch 10-gauge-steel fabricated deck with 7-gauge top and bottom reinforcements for added durability
- Commercial-grade electric-start 15 hp Kawasaki engine (603cc)
- 2-year / no-hour-limit commercial warranty
- Hand-lever steering control with ball bearing linkage for smooth handling
|
| Additional Frame Features |
1.5 x 3" fully welded tube |
| Frame |
Operator Tower with 7ga. Construction |
| Rear Bumper |
N/A |
| ROPS |
N/A |
| Front Axle / Yokes |
Frame-mounted foot pedal front-end lift assist |
|
| Rear Tires |
20" x 10" - 8" (Turf Master) |
| Park Brake / Braking |
Hand-operated lever |
| Operator Controls |
Single-lever cruise control (0-7 MPH) |
| Front Tires |
11" x 4" - 5" smooth (run flat) |
| PTO Clutch |
Warner Clutch - 125 ft lb. |
| Cruise Control |
N/A |
| Lap Bar / Steering Wheel Control |
Hand-lever steering control with ball bearing linkage for smooth feel |
| Additional Controls |
Single-knob straight line tracking ajustment |
|
| Width (Chute Up / Down) |
50"/61" |
| Height (ROPS Down / Up) |
46" |
| Weight |
665 lbs |
| Length |
77" |
|
| Side Construction |
1 / 4" steel |
| Discharge Chute |
High-density, impact-resistant rubber |
| Top Reinforcement(s) |
7ga. top plate |
| Deck Height Adjustment |
4-pin manual with deck-mounted lift handles / 7 positions |
| Spindle Construction |
5" sealed cast aluminum housing (maintenance-free) |
| Deck Size/Type |
48" Fabricated Deck |
| Trim-Side Wear Guard |
3/4" trim-side (polymer) |
| Deck Blades |
3 high-lift Marbain® blades / 18,500 fpm (approx.) |
| Cutting Height |
1.5" - 4.5" |
| Bottom Reinforcement |
7ga. (.175") steel |
| Leading Edge Reinforcement |
7 ga. |
| Deck Style/Construction |
Fixed floating, fabricated 10ga. (.135") steel shell |
|
| Hour Meter |
Standard electronic |
|
| Warranty |
2 year / no-hour-limit commercial warranty |
|
| Horsepower / CC's |
15hp 603cc |
| Engine Type |
Kawasaki FS541v (Electric Start) |
| Fuel Capacity |
5 gal. |
| Ground Speed |
7mph fwd. / 3mph rev. |
| Transmission |
Hydro-Gear® ZT 2800 charged (commercial-grade) |
