CHASSIS
Front Axle / Yolks
Frame-mounted foot pedal front-end lift assist
Rear Bumper
N/A
Additional Frame Features
1.5 x 3" fully welded tube
Frame
Operator Tower with 7ga. Construction
ROPS
N/A
MOWER DECK
Side Construction
1 / 4" steel
Deck Size/Type
54" Fabricated Deck
Spindle Construction
5" sealed cast aluminum housing (maintenance-free)
Trim-Side Wear Guard
" trim-side (polymer)
Deck Blades
3 high-lift Marbain blades / 18,500 fpm (approx.)
Top Reinforcement(s)
7ga. top plate
Leading Edge Reinforcement
7 ga.
Cutting Height
1.5" - 4.5"
Bottom Reinforcement
7ga. (.175") steel
Deck Height Adjustment
4-pin manual with deck-mounted lift handles / 7 positions
Discharge Chute
High-density, impact-resistant rubber
Deck Style/Construction
Fixed floating, fabricated 10ga. (.135) steel shell
OPERATION
PTO Clutch
Warner Clutch - 125 ft lb.
Cruise Control
N/A
Rear Tires
20" x 10" - 8" (Turf Master)
Lap Bar / Steering Wheel Control
Hand-lever steering control with ball bearing linkage for smooth feel
Front Tires
11" x 4" - 5" smooth (run flat)
Operator Controls
Single-lever cruise control (0-7 MPH)
Additional Controls
Single-knob straight line tracking ajustment
Park Brake / Braking
Hand-operated lever
GENERAL
Hour Meter
Standard electronic
WARRANTY
Warranty
2 year / no-hour-limit commercial warranty
ENGINE & DRIVE SYSTEM
Horsepower / CC's
18.5hp 603cc
Engine Type
Kawasaki FS600v (Electric Start)
Fuel Capacity
5 gal.
Ground Speed
7mph fwd. / 3mph rev.
Transmission
Hydro-Gear ZT 2800 charged (commercial-grade)
DIMENSIONS
Width (Chute Up / Down)
56"/67"
Height (ROPS Down / Up)
46"
Weight
720 lbs.
Length
77"
- 54-inch 10-gauge-steel fabricated deck with 7-gauge top and bottom reinforcements for added durability
- Commercial-grade electric-start 18.5 hp Kawasaki engine (603cc)
- 2-year / no-hour-limit commercial warranty
- Hand-lever steering control with ball bearing linkage for smooth handling
Rear Bumper |
N/A |
Front Axle / Yokes |
Frame-mounted foot pedal front-end lift assist |
Additional Frame Features |
1.5 x 3" fully welded tube |
Frame |
Operator Tower with 7ga. Construction |
ROPS |
N/A |
PTO Clutch |
Warner Clutch - 125 ft lb. |
Cruise Control |
N/A |
Rear Tires |
20" x 10" - 8" (Turf Master) |
Lap Bar / Steering Wheel Control |
Hand-lever steering control with ball bearing linkage for smooth feel |
Front Tires |
11" x 4" - 5" smooth (run flat) |
Operator Controls |
Single-lever cruise control (0-7 MPH) |
Additional Controls |
Single-knob straight line tracking ajustment |
Park Brake / Braking |
Hand-operated lever |
Height (ROPS Down / Up) |
46" |
Width (Chute Up / Down) |
56"/67" |
Weight |
720 lbs. |
Length |
77" |
Side Construction |
1 / 4" steel |
Deck Size/Type |
54" Fabricated Deck |
Spindle Construction |
5" sealed cast aluminum housing (maintenance-free) |
Deck Blades |
3 high-lift Marbain® blades / 18,500 fpm (approx.) |
Top Reinforcement(s) |
7ga. top plate |
Leading Edge Reinforcement |
7 ga. |
Cutting Height |
1.5" - 4.5" |
Bottom Reinforcement |
7ga. (.175") steel |
Deck Height Adjustment |
4-pin manual with deck-mounted lift handles / 7 positions |
Discharge Chute |
High-density, impact-resistant rubber |
Trim-Side Wear Guard |
3/4" trim-side (polymer) |
Deck Style/Construction |
Fixed floating, fabricated 10ga. (.135") steel shell |
Hour Meter |
Standard electronic |
Warranty |
2 year / no-hour-limit commercial warranty |
Horsepower / CC's |
18.5hp 603cc |
Engine Type |
Kawasaki FS600v (Electric Start) |
Fuel Capacity |
5 gal. |
Ground Speed |
7mph fwd. / 3mph rev. |
Transmission |
Hydro-Gear® ZT 2800 charged (commercial-grade) |